Bedsore Back Cushion | Medical Back Cushion | Medical Back Support | Pressure Sore Back Cushion | Pressure Relief Back Cushions | Medical Back Cushion for Chair and Wheelchair | Multi-Bearing | Visco Foam with Memory effect |
Premium Quality | Made in France | 49 x 44 x 9 cm | SYSTAM P951

Indications

Back support and Therapeutic Combi-Packs can be used:

• Improve positioning in a wheelchair,
• Improve seating orientation,
• Reduce forward sliding and relieve back pain.
• The choice of device must be approved by the healthcare professional.

Features:

SYST’AM® Back support is with the cushion for the prevention of pressure ulcers: a very complementary system

• Provides significant relief from the Spinal Pressure Points.
• Reduces the risk of sores forming in the Sacrum Area
  due to the reduction in sagittal instability (forward slipping).
• Reduces shear effects on the Sacrum/buttocks Area
  thanks to the better pelvic support.

Improved comfort of the patient in a wheelchair

• Side padding to protect the axillary-dorsal zone from contact
  with the frame of the chair can often be painful for wheelchair users.

Improvement of the positioning and the stability of the patient

• By stabilising the Pelvic Area,
  it contributes to preventing the sliding and risks of falling.
• This is a permanent issue for the elderly at home and in nursing homes;
• The sides “pads” reduce the lateral instability, which is frequent among the handicapped.

Visco Foam – Moulded viscoelastic foam with memory effect

• Precise moulding of the body and an increase in the body surface in contact with the cushion
• Better pressure distribution:
  reduction of transcutaneous pressures on areas at high risk and facilitated blood circulation
• Improved comfort and stability of the patient
• With a very high density to prevent deformation and sagging effects
• Skin effect obtained through the moulding process: protection of the foam against external aggressions (tear, crumbling);

Multi-bearing
Performance of the multibearing concept

• The multibearing surface enables a better pressure distribution
  through the transfer of pressures from areas with low bearing capacity toward areas with high bearing capacity:

WHITE AREAS:

• Areas with low bearing capacity (gentle support)
• frees the vertebral zone from pressure peaks and favors proper dorsal fit.

BLUE AREAS:

• Areas with high bearing capacity (firmer support)
• transfers pressure from high-risk areas and accentuates lateral stability.

Because the 2 layers of the material are moulded together (≠ glued),
They are completely bonded, thus eliminating all risk of separating over time

An Anatomic Form

• Respects the morphology of the back resulting from Kyphosis.
• Respects the Anatomy of the low lumbar, an important aspect of posture.

Improves:

• the positioning of the patient

• the stability of the patient

• the comfort of the patient

• Increases the contact surface
  and therewith reduces the pressures

Repellent and breathable cover

• In the dorsal area, a two-way stretch fabric coated with polyurethane that breathes and is totally waterproof.
• Stretch, coated fabric resists abrasion and constraints of intensive daily use.
• Highly resistant technical fabric positioned in areas subject to greater abrasion.

PU-coated material (polyurethane-coated fabric): 

• It is a synthetic polymer film applied to a base textile like nylon, polyester, or cotton.
• It is highly valued for making fabrics lightweight, flexible, and resistant to water, abrasion, and tearing.

Universal attachment system

Polymaille Cover:

• Integral cover with non-slip base
• Coating of Polyurethane on Jersey polyester

• Anti-allergenic
• Antibacterial
• Antimicrobial
• Antifungal
• Bi-extensibility
• Respirability
• Anti-slip basis

Material Characteristics:

• Coating of polyurethane on Jersey polyester
• Integral covers over 6 sides
• Non-slip base
• Adapted for home care and medical institutions’ use
• Hypoallergenic
• Anti-bacterial, anti-germ, anti-fungal
• bi-extensible
• Hyper-breathable (liquid repellent material and permeable to steam), adapted for incontinence.
  Reduce maceration effects by easing the skin respiration.
• Zip on 3 sides (except P311C)
• Integrated handle

Cover Wash

Foam maintenance
(Do not immerse in water)

Cover Disinfection

Disinfect using cold-application spray products
(Quaternary ammonium – glutaraldhéhydes…)

Certificates

Attachments

File	File size	Downloads
P 951d	1 MB	4107