Air Pump Mattress | Tubes

Specifications :

• Dimensions: 184 x 78 x 7.5 cm
• Weight support: 100 Kg
• Pressure Range: 35 ~ 130 mmHg
• Cycle Time: 5 ~ 10 min
• Air Flow: 3.5 ~ 4.0 liter / min
• Power Supply: 110V, 60Hz / 220V, 550Hz
• Power Consumption : 5W Fuse : 1.50A
• Easy to use KInob Adjust to Individual Weight

Instructions:

1. Place the pump on a stable, flat surface, flip up the hanger, and hook over the railing at the foot of the bed.
2. Lay a flat air mattress with the air connection placed at the foot of the bed.
3. Connect air hoses to pump and mattress.
4. Tuck the end of the air mattress under the regular mattress.
   Make sure the air hoses are Noe tucked and not Kinked.
5. Turn dial to maximum Pressure, plug-in unit, and switch light
   will turn on when the power is working.
6. Ideally, between the patient and a deflated mattress, chamber.
   there should be about two figure width,
7. This product is already defined as class 1 applied part B.