PATIENT MONITOR | PULSE OXIMETER MONITOR | PEDIATRIC

Introduction

The principle of the PM60A Patient Monitor is as follows: Photoelectric Oxyhemoglobin Inspection Technology is adopted in accordance with Capacity Pulse Scanning & Recording Technology, the Patient Monitor can be used in measuring the pulse oxygen saturation and pulse rate through finger. The product is suitable for being used in family, hospital, oxygen bar, community healthcare, physical care in sports (It can be used before or after doing sports, and it is not recommended to use the device during the process of having sport) and etc.

Main Features

■Small in volume, light in weight, and convenient in carrying

■Operation of the product is simple, low power consumption

■SpO2 value display

■Pulse rate value display, bar graph display

■Pulse waveform display

■The display mode can be changed

■With backlight, and changeable backlight-time

■A pulse rate sound indication

■With measured data overruns limits and low-voltage alarm function, the upper/down alarm range can be adjustable

■With clock function

■Battery capacity indication

■Low-voltage indication: low-voltage indicator appears before working abnormally which is due to low-voltage, and with alarm function

■Connected with an external oximeter probe.

■Trend Graph/Table: Resolution from 1s, 5s, 10s, the 30s,1min, and so on. Storage of latest 96 hours trend data.

■Alarm: Adjustable High and Low limits. Three-level audible and visual alarm, latest 50 alarm information, and waveform display 8 seconds which 4 seconds are before a certain time when the alarm is turned on and 4 seconds are after appointed time when the alarm is turned on.

■Upload data: Data stored in an SD card can be uploaded to a computer and analyzed by software “SpO2 Assistant”

Performance Specifications

■Display:  3.5″ Color TFT

■Resolution: 320×240

■Display Mode:  Standard face, Waveform face, Display Direction adjustable  

■Indicator: Power indicator light, Alarm sound, Plus tone

■Interface: One dual-purpose socket for connecting SPO2 sensors and communication cables

■Power Supply: DC 5V, <200MA

■Battery: Built-in Li-Polymer, 2 hours for charging, 8 hours for continuous working.

■Trend Graph: Resolution from 1s, 5s, 10s. Maximum time 96 hours.

■Trend Table: Resolution from 1s, 5s, 10s.  Review up to 2000 items.

■Alarm: Adjustable High and Low limits. Three-level audible and visual alarm