Medical Regulator is Used for Oxygen breathing in the hospital.

Mainly function:

• Oxygen flow range: 1–15 L/min
• Pressure reducing range: 2.0~3.0 kg
• Relief valve pressure range: (3.5 kg ±0.5 kg)
• Input Pressure: 2175 psi
• Output Pressure: 29 – 43.5 psi

Include:

• Oxygen Regulator
• Humidifier Bottle
• Nasal Cannula
• Manual

Appliance introduction:

1. Before using, please fill pour clear water into the moisture bottle about one-third reaching the water line site.
2. DF-2 blind nut straw into bolt head, make the pipe of flow meter square water line.
3. Put off regulator (9), put on the oxygen tube switch, so you will see the data from the needle position of the pressure gauge(2).                At last, the straw flow on/off anti-clockwise according to patients’ needs, adjust the switch.
4. If a patient needs oxygen for a long time can use a nose pipe to help the patient absorb oxygen.
5. Moisture bottle (18) circles clockwise, adjust (13) oxygen hole to other sites.

Attention point:

1. Before using the suction, you will check all parts are bad or good, and clean them with a drying cloth.
2. Pressure gauge (2), regulator (3) no oil, otherwise explode.
3. Clearwater in moisture bottle keep clean.
4.  There is an adjustable nut(6) in front of plunder shall be straw clockwise.
5. Relief valve(7) keeps out danger.
6. Oxygen dosage is decided by the doctor.
7. After using suction, put off the oxygen tube switch, make rest oxygen out, a pressure gauge to zero sites, last put off the flow switch if using again, first put on the oxygen tube switch, avoid exploding.

The post Oxygen Regulator | with Humidifier appeared first on Abu Lail Medical & Sport Center.

MADE IN JAPAN

The post Oxygen Regulator | Type W appeared first on Abu Lail Medical & Sport Center.